2PCS Universal 2 Wires 12V Car Auto Motor Heavy Duty Power Door Lock Actuator

Description

2PCS Universal 2 Wires 12V Car Auto Motor Heavy Duty Power Door Lock Actuator
What we sell?
Genuine Audiotek Universal Car Auto Heavy Duty Power Slave Door Lock Actuator Motor 2 Wire DC 12V AT-DLK2 (2 PIECES)
Product Highlights:
What is a power door lock actuator and where is it located?
The power door lock actuator is the motorized assembly that unlocks and locks the doors on a vehicle with power door locks. Power door locks allow you to unlock and lock your doors without having to manually do so yourself, making it very easy and convenient. It also provides an additional layer of security to your vehicle. Although most power lock systems operate all the doors at the same time, each door has its own individual actuator. The power door lock actuator is usually found inside the door near the lock mechanism. In some newer vehicles, it is built into the latch instead of being connected remotely by a rod or cable. When the power door lock switch or key fob button is pressed, an electrical current is sent to the door actuators and they change from locked to unlocked (and vice versa).
How do I know if my Door Actuators need to be replaced?
The most common cause of car door lock actuator failure is long term use. Since they are all activated at the same time, they are being used even if that door is not opened or closed. Over time, the electrical contacts inside begin to wear down and not make proper connection. Dirt, grease, and grime can build up on the door actuator and cause it to move slower as well.
If your power door lock actuator is not functioning as it should, you won't be able to lock and unlock your car doors without having to manually do so yourself. Not only does this make entering and exiting your vehicle a little more difficult, but it also makes the valuables and belongings you leave in your car or truck more vulnerable to theft. If your door lock actuator is broken, then it's important to have it replaced as soon as possible in order to restore the convenience that power door locks bring, and avoid the increased threat of burglary.
Can I replace a power door lock actuator myself?
Replacement of the car door lock actuator is about as difficult as replacing a door handle. The inside door panel will need to be removed to get access to the actuator. Electrical connections should just require unclipping and moving out of the way. In most cases, the lock actuator is held in place with screws or bolts, but may use rivets as well. In the case of rivets, the old ones will need to be drilled out and replaced with new nuts and bolts.
Heavy duty 2-wire door lock actuator.
Adds power door locks to most vehicles.
Usable with remote control and alarm system.
360 degree rotation.
Easy to install with the installation hardware provided.
Technical Details:
Color: Black
Material: Metal & Plastic
Working voltage: DC 12V
Working temperature: -20°C -+70°C
Current consumption: 0.15A - 2.22A
Endurance (up & down): 100,000 times +
Push & pull force: 4kg
Travel distance: 20mm
Wire length: 16cm / 6.3in
Actuator size: approx. 14.5 * 6 * 3cm / 5.7 * 2.4 * 1.2in
Actuator weight: approx. 86g / 3.0oz
Package size: approx. 30 * 10 * 3cm / 11.8 * 3.9 * 1.2in
Package weight: approx. 123g / 4.3oz
Package Contents:
2 * Actuator (2 wires)
2 * Metal Bracket
2 * Attachment Kit (Triple Lock )
2 * Metal Rod
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by PayPal
We accept payment from PayPal right away when you purchase the item, as this allows us to ship your item to you as quickly as possible!
We offer FREE shipping on most orders!
Your order will be shipped within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it one to three days after we ship your item (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging.
See our other items
What we sell? Genuine Audiotek Universal Car Auto Heavy Duty Power Slave Door Lock Actuator Motor 2 Wire DC 12V AT-DLK2 (2 PIECES) Product Highlights: What is a power door lock actuator and where is it located? The power door lock actuator is the motorized assembly that unlocks and locks the doors on a vehicle with power door locks. Power door locks allow you to unlock and lock your doors without having to manually do so yourself, making it very easy and convenient. It also provides an additional layer of security to your vehicle. Although most power lock systems operate all the doors at the same time, each door has its own individual actuator. The power door lock actuator is usually found inside the door near the lock mechanism. In some newer vehicles, it is built into the latch instead of being connected remotely by a rod or cable. When the power door lock switch or key fob button is pressed, an electrical current is sent to the door actuators and they change from locked to unlocked (and vice versa). How do I know if my Door Actuators need to be replaced? The most common cause of car door lock actuator failure is long term use. Since they are all activated at the same time, they are being used even if that door is not opened or closed. Over time, the electrical contacts inside begin to wear down and not make proper connection. Dirt, grease, and grime can build up on the door actuator and cause it to move slower as well. If your power door lock actuator is not functioning as it should, you won't be able to lock and unlock your car doors without having to manually do so yourself. Not only does this make entering and exiting your vehicle a little more difficult, but it also makes the valuables and belongings you leave in your car or truck more vulnerable to theft. If your door lock actuator is broken, then it's important to have it replaced as soon as possible in order to restore the convenience that power door locks bring, and avoid the increased threat of burglary. Can I replace a power door lock actuator myself? Replacement of the car door lock actuator is about as difficult as replacing a door handle. The inside door panel will need to be removed to get access to the actuator. Electrical connections should just require unclipping and moving out of the way. In most cases, the lock actuator is held in place with screws or bolts, but may use rivets as well. In the case of rivets, the old ones will need to be drilled out and replaced with new nuts and bolts. Heavy duty 2-wire door lock actuator. Adds power door locks to most vehicles. Usable with remote control and alarm system. 360 degree rotation. Easy to install with the installation hardware provided. Technical Details: Color: Black Material: Metal & Plastic Working voltage: DC 12V Working temperature: -20°C -+70°C Current consumption: 0.15A - 2.22A Endurance (up & down): 100,000 times + Push & pull force: 4kg Travel distance: 20mm Wire length: 16cm / 6.3in Actuator size: approx. 14.5 * 6 * 3cm / 5.7 * 2.4 * 1.2in Actuator weight: approx. 86g / 3.0oz Package size: approx. 30 * 10 * 3cm / 11.8 * 3.9 * 1.2in Package weight: approx. 123g / 4.3oz Package Contents: 2 * Actuator (2 wires) 2 * Metal Bracket 2 * Attachment Kit (Triple Lock ) 2 * Metal Rod
2PCS Universal 2 Wires 12V Car Auto Motor Heavy Duty Power Door Lock Actuator
What we sell?
Genuine Audiotek Universal Car Auto Heavy Duty Power Slave Door Lock Actuator Motor 2 Wire DC 12V AT-DLK2 (2 PIECES)
Product Highlights:
What is a power door lock actuator and where is it located?
The power door lock actuator is the motorized assembly that unlocks and locks the doors on a vehicle with power door locks. Power door locks allow you to unlock and lock your doors without having to manually do so yourself, making it very easy and convenient. It also provides an additional layer of security to your vehicle. Although most power lock systems operate all the doors at the same time, each door has its own individual actuator. The power door lock actuator is usually found inside the door near the lock mechanism. In some newer vehicles, it is built into the latch instead of being connected remotely by a rod or cable. When the power door lock switch or key fob button is pressed, an electrical current is sent to the door actuators and they change from locked to unlocked (and vice versa).
How do I know if my Door Actuators need to be replaced?
The most common cause of car door lock actuator failure is long term use. Since they are all activated at the same time, they are being used even if that door is not opened or closed. Over time, the electrical contacts inside begin to wear down and not make proper connection. Dirt, grease, and grime can build up on the door actuator and cause it to move slower as well.
If your power door lock actuator is not functioning as it should, you won't be able to lock and unlock your car doors without having to manually do so yourself. Not only does this make entering and exiting your vehicle a little more difficult, but it also makes the valuables and belongings you leave in your car or truck more vulnerable to theft. If your door lock actuator is broken, then it's important to have it replaced as soon as possible in order to restore the convenience that power door locks bring, and avoid the increased threat of burglary.
Can I replace a power door lock actuator myself?
Replacement of the car door lock actuator is about as difficult as replacing a door handle. The inside door panel will need to be removed to get access to the actuator. Electrical connections should just require unclipping and moving out of the way. In most cases, the lock actuator is held in place with screws or bolts, but may use rivets as well. In the case of rivets, the old ones will need to be drilled out and replaced with new nuts and bolts.
Heavy duty 2-wire door lock actuator.
Adds power door locks to most vehicles.
Usable with remote control and alarm system.
360 degree rotation.
Easy to install with the installation hardware provided.
Technical Details:
Color: Black
Material: Metal & Plastic
Working voltage: DC 12V
Working temperature: -20°C -+70°C
Current consumption: 0.15A - 2.22A
Endurance (up & down): 100,000 times +
Push & pull force: 4kg
Travel distance: 20mm
Wire length: 16cm / 6.3in
Actuator size: approx. 14.5 * 6 * 3cm / 5.7 * 2.4 * 1.2in
Actuator weight: approx. 86g / 3.0oz
Package size: approx. 30 * 10 * 3cm / 11.8 * 3.9 * 1.2in
Package weight: approx. 123g / 4.3oz
Package Contents:
2 * Actuator (2 wires)
2 * Metal Bracket
2 * Attachment Kit (Triple Lock )
2 * Metal Rod
Payment
We accept payment by PayPal
We accept payment from PayPal right away when you purchase the item, as this allows us to ship your item to you as quickly as possible!
Shipping
We offer FREE shipping on most orders!
Your order will be shipped within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it one to three days after we ship your item (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during shipping, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging.
See our other items
What we sell?
Genuine Audiotek Universal Car Auto Heavy Duty Power Slave Door Lock Actuator Motor 2 Wire DC 12V AT-DLK2 (2 PIECES)
Product Highlights:
What is a power door lock actuator and where is it located?
The power door lock actuator is the motorized assembly that unlocks and locks the doors on a vehicle with power door locks. Power door locks allow you to unlock and lock your doors without having to manually do so yourself, making it very easy and convenient. It also provides an additional layer of security to your vehicle. Although most power lock systems operate all the doors at the same time, each door has its own individual actuator. The power door lock actuator is usually found inside the door near the lock mechanism. In some newer vehicles, it is built into the latch instead of being connected remotely by a rod or cable. When the power door lock switch or key fob button is pressed, an electrical current is sent to the door actuators and they change from locked to unlocked (and vice versa).
How do I know if my Door Actuators need to be replaced?
The most common cause of car door lock actuator failure is long term use. Since they are all activated at the same time, they are being used even if that door is not opened or closed. Over time, the electrical contacts inside begin to wear down and not make proper connection. Dirt, grease, and grime can build up on the door actuator and cause it to move slower as well.
If your power door lock actuator is not functioning as it should, you won't be able to lock and unlock your car doors without having to manually do so yourself. Not only does this make entering and exiting your vehicle a little more difficult, but it also makes the valuables and belongings you leave in your car or truck more vulnerable to theft. If your door lock actuator is broken, then it's important to have it replaced as soon as possible in order to restore the convenience that power door locks bring, and avoid the increased threat of burglary.
Can I replace a power door lock actuator myself?
Replacement of the car door lock actuator is about as difficult as replacing a door handle. The inside door panel will need to be removed to get access to the actuator. Electrical connections should just require unclipping and moving out of the way. In most cases, the lock actuator is held in place with screws or bolts, but may use rivets as well. In the case of rivets, the old ones will need to be drilled out and replaced with new nuts and bolts.
Heavy duty 2-wire door lock actuator.
Adds power door locks to most vehicles.
Usable with remote control and alarm system.
360 degree rotation.
Easy to install with the installation hardware provided.
Technical Details:
Color: Black
Material: Metal & Plastic
Working voltage: DC 12V
Working temperature: -20°C -+70°C
Current consumption: 0.15A - 2.22A
Endurance (up & down): 100,000 times +
Push & pull force: 4kg
Travel distance: 20mm
Wire length: 16cm / 6.3in
Actuator size: approx. 14.5 * 6 * 3cm / 5.7 * 2.4 * 1.2in
Actuator weight: approx. 86g / 3.0oz
Package size: approx. 30 * 10 * 3cm / 11.8 * 3.9 * 1.2in
Package weight: approx. 123g / 4.3oz
Package Contents:
2 * Actuator (2 wires)
2 * Metal Bracket
2 * Attachment Kit (Triple Lock )
2 * Metal Rod