-40%
Airsoft Full DSG Dual Sector Gear Setup with all parts needed
$ 39.6
- Description
- Size Guide
Description
Airsoft Full DSG Dual Sector Gear Setup with all parts needed to complete the upgrade.This DSG setup was used in my old Krytac PDW. It was able to hit 45 RPS with a 30,000 rpm balance motor. Starting from the bottom there is a 9 tooth ZCI bevel, krytac 18:1 spur, and the SHS 8 tooth DSG. The piston is the SHS lightened piston which is have taken the front teeth off of and Swiss cheesed. This is connected to the Prometheus POM piston head which has washers on it for perfect AOE correction. On the front of the Guarder Chrome cylinder, the Prometheus cylinder head and air nozzle with O-rings on the inside are installed for great air seal. Connected to that I have a Krytac tappet plate with part of the tab cut off (all DSGs must have this) and a Krytac tappet plate spring with a few coils bent out for extra strength. Using this with an M150 SHS spring (included) I was able to push 330 fps at 45 RPS. Comes with an extra strong spring with an unknown rating.