-40%

Easy Fix Sliding Door Lock Dodge Caravan Chrysler Town Country 2008 and up

$ 21.12

Availability: 63 in stock
  • Brand: Dodge
  • Returns Accepted: ReturnsNotAccepted
  • Type: door lock
  • Condition: New
  • Manufacturer Part Number: Does Not Apply
  • Fitment Type: Performance/Custom
  • Warranty: No Warranty
  • Custom Bundle: Yes
  • Placement on Vehicle: Left

    Description

    If you can remove 1 screw, drill 2 holes in plastic, use zip ties, tighten 3 screws, cut and strip 3/8" of wire, and put tape on things you can fix your sliding door lock.
    Search youtube for
    "Easy Fix Sliding Door Lock Dodge Caravan Chrysler Town Country 2008"
    or here is the link:
    https://www.youtube.com/watch?v=xWtIe_xU160
    Video shows how this is installed.  Detailed wiring instructions included based on US 2013 model.  This fits 2008 and newer Chrysler Town and Country and Dodge Grand Caravans.
    Kit includes:
    T15 torx bit
    lock actuator
    correct length rod and connector bracket
    zip ties
    snap lever wire nut connector
    color wiring instructions
    Tools needed:
    flat head screw driver
    pry bar
    drill hex adapter (or screwdriver that uses hex head bits) to use the included T15 bit
    7/32" or 1/4" drill bit and drill
    utility knife
    wire stripper
    electrical tape
    Easy Fix Sliding Door Lock Dodge Caravan Chrysler Town Country 2008 and up. Condition is "New". Shipped with USPS First Class.
    Normal install of OEM part is between 3 and 8 hours of work, depending on how many minivan doors you have assembled.
    This will fix your power lock problem quickly.  Most feedback has been about an hour start to finish.
    Buy a 2nd one for a discount to have on-hand when the other door lock fails.
    If you are only looking for the electrical wiring instructions they can be purchased and immediately downloaded for .  Look at the link in the description on the youtube video.
    This kit requires the manual lock to be working.  If the actuator seized up and the lock cannot be moved try opening up the door panel and put some force on the linkage rod, same direction the manual lock would be pushing/pulling it.  If you get it to move freely this kit will stop the overtravel of the original actuator by disconnecting the motor.
    If this helps you out but you don't buy parts from me you can still buy say thanks and "leave a tip in the jar".  I might have saved you around 3-6 hours of your time and effort and the ability to do this job without a helper to hold the window up, grab bolts, and hold door pieces in place for reassembly.  That (or more if you feel your free time is worth it) link is also in the youtube description.
    Original Failed Car part numbers: 4717960AC 4717961AB 68030378AF 68030380AD
    746-259 72064