GunSkins M-Series (AEG) Airsoft Rifle Skin Camouflage DIY Vinyl Wrap Kit

Description

GunSkins are Do It Yourself Vinyl Wraps for Any M-Series Airsoft Electric Gun Rifle
Cover and protect your airsoft rifle with a GunSkins M-Series Compatible Airsoft Rifle Skin! Our precut template makes installation quick and easy. Simply clean the surface, peel and press, add heat to conform, and trim away any excess material. GunSkins offers top of line camouflage and specialty patterns to choose from, fit for any application.
GunSkins Rifle Skins are designed to fit any M-Series AEG airsoft rifle. The kit includes pieces for the upper and lower receiver, pistol grip, magazine, picatinny rails (up to 16"), plus enough material for the forend, buttstock, and other accessories.
GunSkins M-Series Compatible Airsoft Rifle Skin Kit Template with Precut Pieces
GunSkins Rifle Skins will fit any M-Series AEG airsoft rifle
. Because of the many subtle (and sometimes not to subtle) variances from different rifles, it may require some custom installation and creative trimming to make fit just right. The kit comes with the following precut pieces:
- Upper Receiver
- Lower Receiver
- Dust Cover
- Magwell
- Forward Assist
- Pistol Grip
- Picatinny rails (up to 16")
- Magazine
- 8" x 22" sheet for buttstock, forend, barrel, etc.
They are waterproof and have a non-reflective matte finish. GunSkins Airsoft Rifle Skins conform to any shape and are easy to install. They are available in a variety of tactical, hunting, and specialty camouflage patterns.
Frequently Asked Questions
Why won't the vinyl stick to the surface of my gun?
You must thoroughly clean the gun before installing the wrap. Use a gun-specific degreaser and a small brush, scrubing all recessed areas to remove oil and dirt. Wipe clean using a lint-free cloth or rinse with warm water and let air dry.
Can the wrap be removed?
GunSkins are removable and have no effect on the finish. To remove, heat the material with a heat gun/blow dryer and peel off piece by piece.
Is it waterproof?
​
The high-performance vinyl is non-porous, which means that the material creates an air-tight seal that also prevents water from getting in or out. As a matter of fact, GunSkins are completely waterproof.
Will heat from the barrel melt the vinyl?
The heat from the barrel will not affect the material. However, we do not recommend wrapping the barrel if you fire using full auto or use a suppressor.
Step by Step Installation Instructions
Clean the Surface.
Use a gun-specific degreaser and a small brush to work away all dirt, oil, lubrication, and residue. Rubbing alcohol is a good last step to remove moisture, but alone is not strong enough to cut through gun oil.
A clean gun makes for a clean install.
Peel and Stick.
Peel the material off the template, one piece at a time. Place it centered on the surface and work it in using your fingers.
​If need to, peel off and reposition until you are satisfied with the placement.
Heat and Trim.
Use a heat gun or blow dryer to get the vinyl to conform to the shape of the gun. Take your time and work away wrinkles and air bubbles.
​Use a sharp hobby knife to trim away excess material. Overlap the extra and press firmly to set. Heat again to finish.